| |
| PRODUCTS |
| |
|
|
|
 Solution
64 / Solution 16 Plus
|
| GRAPHIC USER INTERFACE
TECHNOLOGY |
| |
Featured
on Bosch Solution 64 and Solution 16plus,
Bosch Graphic User Interface Technology
delivers the most comprehensive displays
available! The large back lit LCD display
uses pixel technology from Bosch to graphically
display all system conditions at a glance.
Programmable features and options are
displayed using simple text menus, allowing
the system to be programmed and configured,
practically without referring to the manual.
At all times the user and installer are
prompted in plain English text, clearly
identifying the current operating mode
and enhancing feedback for trouble free
and simple operation.
An enhanced version of the Graphic Code
Pad incorporates a built-in proximity
reader allowing users to simply present
their token to the Code Pad to arm/disarm
and or unlock a door. Children and the
elderly will find this feature extremely
easy to use as no PIN codes are required
for operation. A maximum of 8 Code Pads
in any combination (proximity enabled
or not) are available per system. Solution
64 and Solution 16plus panels may be fully
programmed using the graphic interface
or using a PC loaded with Solution Link
software. Built on SQL database technology,
the Windows based Solution Link software
offers single and multi-user operation,
with the ability to control the functions
each operator can perform via programmable
authority levels. |
 |
|
 Graphic
User Interface with optional Proximity Reader
built-in
Full
Menu Text Programming
Free
Text for users, zones, outputs, areas &
schedules
Digital
Contrast and Brightness Control
Attractive
Modern Slimline Design
Temperature
Display
Dedicated
On, Off and Part Keys
Simple
to arm & disarm. PIN + ON or OFF
Code
Pad Hold down functions, Duress, Panic and Fire
On/Off
status LEDs
Delayed
trouble beeps |
| |
 |
|
| PART
NUMBER |
DESCRIPTION |
PRICE
EX GST |
|
| |
|
|
Solution
64 Control Panel (with
transformer)
Graphic
User Interface with
optional Proximity Reader
built-in
Integrated
Access Control
Multi-Vendor
Wireless Compatible
Programmable
EOL Resistor Values
Sensor
Watch
Telco
Line Fail Detection
Dual
Reporting
C.L.I.
Enabled Intelli-Connect
CID,
SIA, Domestic, Voice,
SMS Reports
16
On-Board zones expandable
to 64 wired or wireless
128
Users
Partitionable
to 8 areas
3
year warranty |
 |
|
 |
|
|
|
|
|
|
Solution
16PLUS Control Panel
(with transformer)
Graphic
User Interface with
optional Proximity Reader
built-in
Multi-Vendor
Wireless Compatible
Programmable
EOL Resistor Values
Sensor
Watch
Telco
Line Fail Detection
Dual
Reporting
C.L.I.
Enabled Intelli-Connect
CID,
SIA, Domestic, Voice,
SMS Reports
16
On-Board zones wired
or wireless
48
Users
Partitionable
to 4
|
|
|
|
|
|
|
|
|
| |
|
|
Solution
64/16PLUS Graphic Code
Pad
White with Green LCD
screen
Graphic
LCD Display
Slim
Line Design
Large
backlit Code pad keys
Dedicated
On, Off and Part Mode
keys
Choice
of White with Green
LCD or Black with Blue
LCD
Digital
Contrast and Brightness
Control
Code
Pad Hold down functions,
Duress, Panic and Fire
On/Off
status LEDs
Delayed
trouble beeps
Optional
Built in Proximity Reader
Remote
Arming, Disarming &
Area Control
Chime
Alarm |
|
|
|
|
|
|
|
|
| Solution
64/16Plus Modules |
|
|
| |
|
|
8/16
Zone Expander PCB Only
8 / 16 zones expansion
Dip switch addressable
Automatic recognition
and configuration by
control panel
Fully monitored by control
panel
Separate tamper input
Status LED |
|
|
|
|
|
|
|
16/32
Zone Expander with Enclosure
16 / 32 zones expansion
Dip switch addressable
Compatible with CM106
8 / 16 zone piggy back
expander
Automatic recognition
and configuration by
control panel
Fully monitored by control
panel
Separate tamper input
Status LED
Powered by panel bus
or external power |
|
|
|
|
|
|
|
|
|
|
1AMP
Power Supply & Battery
Charger
2 x 500mA 13.8VDC outputs
Separate PTC fused protection
per output
On-board battery Charge
circuit
Mains, Power Supply
status and Low Battery
LEDs
Output power LEDs
AC fail output
Dip switch addressable
Automatic recognition
and configuration by
control panel
Fully monitored by control
panel
Separate tamper input |
|
|
|
|
|
|
|
1AMP
Power Supply & Battery
Charger
Allows up to 3 RF receivers
to be simultaneously
connected to control
panel
Allows connection of
3rd party wireless systems
Separate Status LED
for each receiver connected
to CM195 Dip
switch addressable
Automatic recognition
and configuration by
control panel
Fully monitored by control
panel
Separate tamper input |
|
|
|
|
|
|
|
|
|
|
| |
|
|
Metal
Enclosure Small (2 large
modules or 4 small) |
|
|
|
|
|
|
|
Metal
Enclosure Large (4 large
modules or 8 small) |
|
|
|
|
|
|
|
Solution
800 Enclosure Conversion
Kit to Solution 64 |
|
|
|
|
|
|
|
Direct
Connect Cable for Solution
16i/16plus/64 |
|
|
|
|
|
|
|
Flash
Programmer Direct Connect
Cable and Flash Programmer
for
Solution 16i/16 plus
/64 |
|
|
|
|
|
|
|
DB9
Serial Extension Cable
5 metre |
|
|
|
| |
|
|
 |
|
Solution
16i
|
| TEXT ICON USER INTERFACE
TECHNOLOGY |
| |
Using
fixed text and easy-to-recognise icons,
the Solution 16i code pad takes proven
Bosch LCD icon technology to a new level.
System status can be determined at a glance
during operation, with menu locations
and parameter information clearly displayed
during programming. No longer are technicians
left to determine parameters by interpretation
of icons. No longer will you be left wondering
exactly which memory location you are
looking at.
An enhanced version of the Solution 16i
code pad incorporates a built-in proximity
reader allowing users to simply present
their token to the code pad to arm / disarm
the system and / or unlock a door. Children
and the elderly will find this feature
extremely easy to use as no pin is required
for normal operation.
You can program the Solution 16i via the
code pad or using a PC loaded with Solution
Link software. Built on SQL database technology,
the Windows based Solution Link software
offers single and multi-user operation,
with the ability to control the functions
each operator can perform via programmable
authority levels. |
 |
|
Graphic
User Interface with optional Proximity Reader
built-in
Full
Menu Text Programming
Free
Text for users, zones, outputs, areas &
schedules
Digital
Contrast and Brightness Control
Attractive
Modern Slimline Design
Temperature
Display
Dedicated
On, Off and Part Keys
Simple
to arm & disarm. PIN + ON or OFF
Code
Pad Hold down functions, Duress, Panic and Fire
On/Off
status LEDs
Delayed
trouble beeps |
| |
|
|
| PART
NUMBER |
DESCRIPTION |
PRICE
EX GST |
|
| |
|
|
Solution
16i Control Panel (with
transformer)
Text
ICON LCD Display with
optional proximity reader
Multi-Vendor
Wireless Compatible
Programmable
EOL Resistor Values
Sensor
Watch
Telco
Line Fail Detection
Dual
Reporting
Caller
ID enabled for remote
connect
CID,
SIA, Domestic, Voice,
SMS Reports
16
On-Board zones wired
or wireless
48
Users
Partitionable
to 4 areas
Fully
Programmable from the
Code Pad
Programmable
via SolutionlinkTM Software
(Remote/Direct)
3
year warranty
Use
with CP510i & CP511i
code pads only
|
|
|
|
|
|
|
|
|
| |
|
|
Solution
16ICON Code Pad
Text
ICON LCD Display
Slim
Line Design
Large
backlit Code pad keys
Dedicated
On, Off and Part Mode
keys
Digital
Contrast and Brightness
Control
Code
Pad Hold down functions,
Duress, Panic and Fire
On/Off
status LEDs
Delayed
trouble beeps
Optional
Built in Proximity Reader
Remote
Arming, Disarming &
Area Control
Chime
Alarm |
|
|
|
|
|
|
|
|
Night
Arm Station
Designed for placement
by the bedside, the
CP050 allows you to
arm your system in the
PART mode 1 or PART
mode 2 by pressing one
button, and to disarm
your system (provided
no alarms have occurred).
It also allows you to
trigger a panic alarm
at any time of the day
or night should an emergency
situation arise. |
|
|
|
|
| |
|
|
8/16
Zone expansion module
• Provides
8 physical zone input
terminations per module
• Allows zones
to be remotely located
away from control panel
to reduce cabling costs
• Supports both
LAN or external power
• Separate tamper
input
• Service
code pad input |
|
|
|
|
|
|
|
4
Way Relay Output Module
• 4 x Form
C relays
•
2 Amp contact rating
at 24VDC
•
May be remotely located
and controlled from
panel
• Separate
tamper input
•
Service code pad input |
|
|
|
|
|
|
|
Multi
RF Receiver Interface
• 3 x independent
wireless receiver inputs
• Support for
multiple vendors RF
technologies
•
Allows increased wireless
coverage and reliability
• Easy 3 wire
connection to the control
panel
• Data
received and processed
indicators |
|
|
|
|
|
|
|
|
|
| |
|
|
Metal
Enclosure Small (2 large
modules or 4 small) |
|
|
|
|
|
|
|
Metal
Enclosure Large (4 large
modules or 8 small) |
|
|
|
|
|
|
|
Solution
800 Enclosure Conversion
Kit to Solution 64 |
|
|
|
|
| |
|
|
SolutionLink
Upload / Download Software |
|
|
|
|
|
|
|
Direct
Connect Cable for Solution
16i/16plus/64 |
|
|
|
|
|
|
|
Flash
Programmer Direct Connect
Cable and Flash Programmer
for
Solution 16i/16 plus
/64 |
|
|
|
|
|
|
|
DB9
Serial Extension Cable
5 metre |
|
|
|
| |
|
|
|
|
Solution
16
|
The
Solution 16 control panel provides sixteen
programmable hard wired zones across.
Remote programming using Alarm link software
provides added convenience and capability.
With four areas and three arming modes
the Solution 16 control panel is a flexible
system ideal for domestic and small commercial
installations. The system supports up
to 32 users.
For the installer the Solution 16 provides
a robust trouble free platform to ensure
quality installations, with a choice of
different EOL resistor values allowing
the control panel to be easily retrofitted
into an existing installation.
Post installation the Solution 16 sensor
watch feature monitors the activity of
the devices connected to the control panel,
ensuring devices remain serviceable and
that system integrity is maintained. |
 |
|
| |
|
|
| PART
NUMBER |
DESCRIPTION |
PRICE
EX GST |
|
| |
|
|
Solution
16 Control Panel (with
transformer)
16
zone control panel
16
fully programmable zones
Expandable
to 16 outputs
32
User codes
Partitionable
to 4 areas
Domestic
dialling
Selectable
EOL
Automatic
arm
Day
alarm
Perfect
for medium to large
residential applications
and retail outlets
Use
with CP516LW or CP516W
code pads . When partitioned
use with CP500PW or
CP500AW code pads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Night
Arm Station
Designed for placement
by the bedside, the
CP105A allows you to
arm your system in the
STAY mode by pressing
one button and also
disarm your system provided
no alarms have occurred.
It also allows you to
trigger a panic alarm
at any time of the day
or night should an emergency
situation arise. |
|
|
|
|
|
|
|
Spare
Doors for all CP500
Series Code Pads |
|
|
|
|
| |
 |
|
|
| CC811 |
|
|
Modem
Module
for Solution 844, 880
Ultima and Solution
16 Control panels
for SMS reporting, as
applicable |
|
|
|
|
|
 |
|
|
| CC886 |
|
|
Telephone
DTMF Command Module
• Telephone
DTMF Command Module
• Allows you to
call from any touch
tone phone in the world
and program, arm and
disarm the Control Panel
• It will also
allow domestic dialling
to be acknowledged &
remote outputs to be
switched on / off via
the phone. |
|
|
|
|
|
 |
|
|
| CC888 |
|
|
Voice
Module
• Programmable
Voice Recorder Module
for Domestic Voice Reporting
• Maximum 16 second
message that can be
changed as often as
required with 10 year
memory retention
• No need to reprogram
after loss of power
• No batteries
required |
|
|
|
|
|
 |
|
|
| CC887 |
|
|
Solution
Line Fault Module
• Telephone
Line Fault Monitor Module
monitors the phone line
and provides an output
and / or triggers the
siren when the line
fails or is disconnected
from the system |
|
|
|
|
|
 |
|
|
| CC891 |
|
|
Solution
16 & 800 Programming
Key
Allows you to store
your standard programming
options and then to
program other panels
with those options in
5 seconds |
|
|
|
|
| |
|
|
Metal
Enclosure for Solution
844/880/Ultima/16 |
|
|
|
|
| |
|
|
Alarm
Link V2.8) |
|
|
|
|
|
|
|
Direct
Link Cable for Solution |
|
|
|
| |
|
|
|
|
Solution
880 Ultima
|
| Solution 880 Ultima |
|
The
Solution 880 Ultima control panel provides
eight programmable hard-wired or wireless
zones. The Solution 880 control panel
provides eight wired only zones. Remote
programming using Alarm link software
provides added convenience and capability.
With two areas and three arming modes
the Ultima control panel is a flexible
system ideal for domestic and small commercial
installations.
For the installer these panels provide
a robust trouble free platform to ensure
quality installations, with a choice of
different EOL resistor values allowing
the control panel to be easily retrofitted
into an existing installation.
Post installation, the Solution 880 Series
sensor watch feature monitors the activity
of the devices connected to the control
panel, ensuring devices remain serviceable
and that system integrity is maintained.
The Solution 880 Ultima is compatible
with Bosch Wireless (DSRF) technology. |
 |
|
| |
|
|
| PART
NUMBER |
DESCRIPTION |
PRICE
EX GST |
|
| |
|
|
Solution
Ultima 880 Control Panel
with transformer
• 8 zone
control panel
•
8 fully programmable
zones
• Wireless
capable (with RF3212E)
• 16 wireless
devices
•
8 User codes
•
Dual reporting
•
Partitionable to 2 areas
• Domestic dialling
• Selectable EOL
• Automatic arm
/ disarm
•
Day alarm
•
Perfect for small to
medium residential applications
and small retail outlets
• Use with CP508LW
or CP508W code pads
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Night
Arm Station
Designed for placement
by the bedside, the
CP105A allows you to
arm your system in the
STAY mode by pressing
one button and also
disarm your system provided
no alarms have occurred.
It also allows you to
trigger a panic alarm
at any time of the day
or night should an emergency
situation arise. |
|
|
|
|
|
|
|
Spare
Doors for all CP500
Series Code Pads |
|
|
|
| Solution
880 Ultima Modules |
|
|
| |
|
|
|
| CC811 |
|
|
Modem
Module
for Solution 844, 880
Ultima and Solution
16 Control panels for
SMS reporting, as applicable |
|
|
|
|
|
|
|
|
| CC891 |
|
|
Programming
Key
Allows you to store
your standard programming
options and then
to program other panels
with those options in
5 seconds |
|
|
|
|
| |
|
|
Metal
Work - Solution Series |
|
|
|
|
| |
|
|
Alarm
Link V2.8 |
|
|
|
|
|
|
|
Direct
Connect Cable |
|
|
|
| |
|
|
|
|
Solution
880
|
| Solution 880 |
| |
|
|
| PART
NUMBER |
DESCRIPTION |
PRICE
EX GST |
|
| |
|
|
|
Solution
880 Control Panel (PCB
Only) |
|
|
|
|
|
|
|
Solution
880 Control Panel with
Plug Pack |
|
|
|
|
|
|
|
|
|
|
|
Night
Arm Station
Designed for placement
by the bedside, the
CP105A allows you to
arm your system in the
STAY mode by pressing
one button and also
disarm your system provided
no alarms have occurred.
It also allows you to
trigger a panic alarm
at any time of the day
or night should an emergency
situation arise. |
|
|
|
|
|
|
|
Spare
Doors for all CP500
Series Code Pads |
|
|
|
| Solution
880 Ultima Modules |
|
|
| |
|
|
|
| CC811 |
|
|
Modem
Module
for Solution 844, 880
Ultima and Solution
16 Control panels for
SMS reporting, as applicable |
|
|
|
|
|
|
|
|
| CC891 |
|
|
Programming
Key
Allows you to store
your standard programming
options and then
to program other panels
with those options in
5 seconds |
|
|
|
|
| |
|
|
Metal
Work - Solution Series |
|
|
|
|
| |
|
|
Alarm
Link V2.8 |
|
|
|
|
|
|
|
Direct
Connect Cable |
|
|
|
| |
|
|
|
|
Solution
844
|
To
operate, all it takes is “one touch”.
By simply holding the #AWAY key you can
arm your system in Away mode. To disarm
simply enter your 4 digit code. Code pads
can be installed at entry points for your
convenience or you can control your system
using wireless remotes, which attach to
your keyring.
The Solution 844 allows you to choose
from either a LED or LCD ICON code pad.
Simple ICONS or indicators make it easy
to identify the status of your system
at all times. The Solution 844 has 4 programmable
zones and 4 fixed zones, which can be
used to monitor for intrusion, fire, system
tamper events or panic buttons. Night
Arm Stations can be added to the Solution
844 unit providing added security and
protection from the convenience of your
bedside. You can arm and disarm the system
at the touch of a button and it also has
an easy to operate
built in panic function. |
 |
|
| |
|
|
| PART
NUMBER |
DESCRIPTION |
PRICE
EX GST |
|
| |
 |
|
| CC404X |
|
|
Solution
844 Control Panel with
transformer
• 8 Zone
control panel
•
4 Programmable burglary
zones and four 24 hour
zones
• 8
User codes
•
Dual reporting
•
Partitionable to 2 areas
• Domestic dialling
• Selectable EOL
• Automatic arm/disarm
• Day alarm
• Perfect for
small to medium residential
applications and small
retail outlets
•
Use with CP508LW or
CP508W code pads
|
|
|
|
|
|
|
|
Solution
844 Control Panel (PCB
Only) |
|
|
|
|
|
|
|
Solution
844 Control Panel with
Plug Pack |
|
|
|
|
|
|
|
|
| |
|
|
|
|
G
Series
|
| G Series Security Controls |
|
Simpler
installation, new personal safety features
for specialised applications and Easy
Exit make G Series better than ever!
Packed with features, you can easily sell
GV2 into environments with special concerns
and security needs – such as bank
branches, shopping malls, office complexes
and schools. Installation is quicker and
easier with extra power terminals and
ring posts.
Look at these
customer-friendly features:
• Two-person disarm –
requires two people to disarm using separate
codes for high security
• Early
ambush – redundant confirmation
before and after inspection
•
Multiple area access changes – one
keypad, one command
• Easy Exit
– change arming state with one command
• Access control token – present
a token, no keying required
See what we mean? These could be the easiest
sell you ever have! And the G Series integrate
easily with Bosch CCTV and access control
systems so they fit virtually any site.
|
 |
|
| |
|
|
| PART
NUMBER |
DESCRIPTION |
PRICE
EX GST |
|
|
| Bosch
9412 Control Panels |
|
|
| |
|
|
D9412
Security Alarm &
Access Control Panel
• Up to 246
fully programmable zones
(8 on-board, remainder
with expanders, POPIT,
or MUX)
•
3 Onboard outputs (D136
reqd for O/P B &
C)
• Expandable
to 250 users, 8 areas
• 996 Access control
cards across 8 doors
• Remote program
with RPS
•
1000 event, non-volatile
history buffer
|
|
|
|
|
|
|
|
|
|
|
16
character VFD Text Command
Centre
Command Centres for
the D9412 alarm panel.
Beige colour to match
any decor. D720 for
economy, and D1255 for
jobs where sunlight
strikes directly onto
the command centre,
or advanced user features
are required. Bosch
recommend at least 1
D1255 or D1260 command
centre per system. |
|
|
|
|
|
|
|
Advanced
LCD Text Command Centre
Command Centre for the
D9412 alarm panel. This
CC features a 4 line,
20 character, LCD, plain-English
codepad. Featuring 8
ATM style ‘soft-keys’,
this CC prompts the
end user how to operate
the system. The less
the user needs to remember,
the easier the system
is to use. Req ROM ver
6.4. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Bosch
4412 / 6412 Control
Panels |
|
|
| |
|
|
D6412
Security Alam Panel
• Up to 40 fully
programmable or RF zones
(8/15 on-board, remainder
with expanders)
• Zone doubling
• 4 Onboard outputs
(expandable to 20)
• 32 Users, 4 areas
• 3 Different reporting
formats, incl pager
options
• Programming
key capable (PK32)
• Remote program with
RPS
• Requires
RF3224 for remotes &
wireless zones |
|
|
|
|
|
|
|
|
| Bosch
4412 / 6412 Code
pads |
|
|
|
|
|
|
|
LCD
Codepad, 2 Line, Wih
Area Armed Status
Command Centres for
the D6412 alarm panel.
Beige colour to match
any decor. D621 for
economy, D623 for most
jobs, and D625 for jobs
where the sun strikes
directly onto the command
centre. D626 also indicates
the armed status of
other areas on the system. |
|
|
|
| Bosch
4412 / 6412 Accessories |
|
|
|
|
|
| Bosch
4412 / 6412 Wireless
Accessories |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Bosch
4412 / 6412 /
9412 Programming
Accessories |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
Professional
Series
|
These high security
motion detectors feature sensor data fusion
technology, which enables data comparison
from all the detector’s sensors
to significantly reduce false alarms.
The detectors feature up to five different
sensors within each unit as well as a
highly sophisticated microprocessor that
gathers data from each sensor
and, via a proprietary algorithm, determines
whether an alarm is necessary or not.
Tri-focus optics technology includes three
separate lenses with specific focal lengths
for long-range, medium-range and short-range
coverage, eliminating the need to adjust
the lenses at different mounting heights
and providing wall to wall coverage with
no gaps.
The two pyroelectric sensors are used
for long-range coverage and mid to short-range
coverage, respectively, doubling the resolution
and signal strength of the detector for
improved sensitivity and catch performance,
while reducing false alarms.
Professional Series detectors are ideal
for a variety of indoor commercial and
retail applications such as banks, jewellers
and warehouses. |
|
| |
|
|
| PART
NUMBER |
DESCRIPTION |
PRICE
EX GST |
|
| |
|
|
16m
x 21m Professional Series
PIR
• User-definable
coverage pattern: 16
x 21m or 7.5 x 10m
• Sensor Data
Fusion - 4 sensors in
one
• TriFocus
optical system: improved
false alarm memory
• 2 to 3m mounting
height
• Adjustable
lens and tamper switch
• Active white
light suppression
• LED auto dim
• Built-in bubble
level
• Alarm
memory
• Two
piece sliding, locking
cover
• Look-down
zone
• Hinged
chassis and base plate
for easy installation
• Remote walk
test |
|
|
|
|
|
|
|
18m
x 25m Professional Series
Tritech
• User-definable
coverage pattern: 18
x 25m or 7.5 x 10m
• Range Adaptive
Doppler Microwave
• Sensor Data
Fusion - 5 sensors in
one
• TriFocus
optical system: improved
false alarm memory
• 2 to 3m mounting
height
• Adjustable
lens and tamper switch
• Active white
light suppression
• LED auto dim
• Built-in bubble
level
• Alarm
memory
• Two
piece sliding, locking
cover
• Look-down
zone
• Hinged
chassis and base plate
for easy installation
• Remote walk
test |
|
|
|
|
| | | | | | | |
